1000W Teflon Splitter Combiner Set

1000W Teflon Splitter Combiner Set The 1000W Teflon Splitter – Combiner Set is designed for FM radio transmitters, ideal for splitting and combining FM signals in the 88-108MHz frequency range. Specifically designed for combining two RF amplifiers or driving 2 antennas of 1000 watts of power. Maximum power loss 0.12dB.
PCB measures 4.94 inches x 3.18 inches.
250 watt 100 ohm power balance resistor.
PCB is Teflon filled ceramic; controlled dielectric constant.
Non-reactive, meaning you can use 3 boards to create a 4-output combiner.
Guaranteed not to burn out in high conditions.
1000W Teflon Splitter Combiner Set
The splitter combiner set includes 2 Teflon Combiner PCBs and two resistors, as shown here. (1) The 100 ohm 5 watt axial lead resistor is ideal for low power situations, such as at the input of a pair of pallet amplifiers. (2) The 250 watt 100 ohm flanged resistor is intended for high power use. Splitter combiners are useful for combining RF amplifiers to achieve high power levels. They are also used in multi-bay-antenna configurations. This combiner will handle up to 1000 watts because of its extremely low loss characteristics and Teflon construction. These mixers should not be used to combine 2 pallets of 600W or 700W. We are working on a new design for this purpose. These combiners and 100 ohm resistor flange must be attached to a heatsink to ensure efficient PCB dom. The back side of the PCB can be coated with a very thin layer of heatsink compound. All mounting holes must be used. The resistors are not connected to the PCB. We leave this work to the end user.
An AutoCad / DXF file showing the locations of the mounting holes is available on request. This page is under construction. The table below summarizes the typical performance of our splitter / combiner. You will find that our combiners offer excellent performance at a low price. Who else sells a high-power combiner on a Teflon / ceramic substrate?

 
1000W Teflon Splitter Combiner Set