Genelec 8020D Audio Monitor
GENELEC 8020D AUDIO MONITOR
The Genelec 8020D Active Bidirectional 4″ Studio Monitor provides accurate reproduction in a compact form factor. The aluminum enclosure has a rounded shape, which minimizes frequency distortion and reflection caused by edge diffraction.
GENELEC 8020D AUDIO MONITOR
The Genelec 8020D Active Bidirectional 4″ Studio Monitor provides accurate reproduction in a compact form factor. The aluminium cabinet has a rounded shape, which minimizes frequency distortions and reflection caused by edge diffraction. The metal dome tweeter is surrounded by Genelec’s Directivity Controlled Waveguide, which helps to create a uniform response when listening on and off axis. The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it into standby mode when no signal is present, reducing its power consumption to less than 0.5W. The 8020D audio monitor has a 50W high-frequency amplifier for its ¾” tweeter and a 50W low-frequency amplifier for its 4″ woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wide range of frequencies.
Genelec 8020D Specifications
| Cut-off frequency | Lower: ≤ 56 Hz at -6 dB Upper: ≥ 25 kHz at -6 dB |
| Frequency Response | 62 Hz to 20 kHz (± 2.5 dB) |
| SPL | ≥ 100 dB maximum SPL (short-term sine wave acoustic output on-axis, in half-space, averaged from 100 Hz to 3 kHz at 3.3 feet / 1 m) 93 dB maximum SPL (long-term RMS acoustic output under the same conditions with IEC weighted noise (limited by the driver protection circuit) at 3.3 ‘/ 1 m) |
| Peak output capacity | ≥ 107 db maximum peak acoustic output (per pair in listening room with musical material at 3.3 feet / 1 m) |
| Automatically generated noise level | ≤ 5 dB (in free field at 3.3 ‘/ 1 m on axis (A-weighted)) |
| Harmonic distortion | <3% (at 85 dB SPL at 3.3′ / 1 m on axis, 50 to 200 Hz) <0.5% (at 85 dB SPL at 3.3′ / 1 m on axis, above 200 Hz) |
| Drivers | Bass: 105 mm / 4 ” cone Treble: ¾” / 19 mm metal dome Both drivers are magnetically shielded |
| Amplifier | Short-term output power of the bass amplifier: 50 W Short-term output power of the bass amplifier : 50 W Long-term output power is limited by the driver’s protection circuitry |
| THD | ≤ 0.05% at nominal output |
| Cross frequency | Bass / treble: 3 kHz |
| Digital Controls | GLM software frequency response adjustment Parametric notch filters: 16x Shelf filters: 2 x LF and 2 x HF System room response calibration: Genelec GLM AutoCal, GLM manual, independent |
| Mains voltage | 100 to 240 VAC 50/60 Hz |
| Power consumption | Idle: 3 W At standby: <0.5 W Total output: 60 W |
| Analog input | XLR female, balanced (pin 1 ground, pin 2 positive, pin 3 negative) |
| Input level | -6 dBu at maximum volume control (for 100 dB SPL at 3.3′ / 1 m) |
| Input impedance | 10 kOhms |
| Sensitivity | -12 dB (constantly variable, control range in relation to maximum output) |
| Controls | Treble Pitch Control (operating range): 0 to -2 dB at 15 kHz 200 Hz Work Area Control: -4 dB at 200 Hz Bass Roll-Off Control: 0 to -4 dB at 65 Hz |
| Analog input | Maximum analog input level: +24 dBu Analog input sensitivity: -6 dBu (100 dBSPL at 3.3′ / 1 m) Analog input sensitivity control: adjustable from +36 to -6 dBu |
| Dimensions (H x W x D) | 9.5 x 6.0 x 5.6″ / 242.0 x 151.0 x 142.0 mm, Iso-Pod holder included 9.1 x 6.0 x 5.6″ / 230.0 x 151.0 x 142.0 mm, Iso-Pod holder excluded |
| Weight | 7.0 lb / 3.2 kg |
| package weight | 8.77 lb |
| Case dimensions (LxWxH) | 14.95 x 7.95 x 7.75 “ |
