Wheatstone LX-24 1212
O Wheatstone Lx-24 Digital On-Air Console is a fully modular compact console designed to operate with WheatNet IP. It has an impressive set of features, including 4 LEDS meters, a low profile design and a form factor that allows the LX-24 console to fit into a studio.
WHEATSTONE LX-24 1212
[vc_row][vc_column][vc_column_text]
Wheatstone LX-24-2424, 24 Faders, 24 frames, 24 modules, radio console. Wheatstone LX-24 is a compact, modular control surface designed from the ground up to work with WheatNet-IP. It has an impressive look, and a wide range of features, including high-resolution digital meters. Without a doubt, this control surface is a showpiece for any broadcaster.
Wheatstone LX-24 fits into almost any studio situation, with no need for holes or cut-outs in the furniture. This console features three sets of bright, ultra-high resolution LED meters, as well as LED talkbacks for aux levels and pan control. A digital clock/timer is also included.
Each fader provides access to four stereo buses, plus four aux pre-fader, one stereo CUE bus, and four mix-minuses. An LED display with source name, an A / B source selector, and two programmable buttons are also available, and a SET button provides access to the programmable controls in the master section.
Control room and headphone outputs with level control and source selection are provided, as well as two independent studio monitor outputs. CUE stereo speakers are integrated into the metter bridge.
On-board VGA and USB connectors allow the use of a monitor and mouse connected to the console for configuration; they are not required during normal operations. Snapshot configurations on the LX-24 console can be saved and recalled at the touch of a button, making it very easy to configure different programs in the blink of an eye.
The LX-24 is designed for use with Wheatstone’s WheatNet-IP Intelligent Network. An IP-88E Mix Engine BLADE provides audio mix functionality; additional BLADS can be added for inputs and outputs in a variety of digital and analog formats. This I/O can be shared with other consoles and devices throughout the Intelligent Network.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]This console is available in the configurations:
Indicate the desired configuration in the remark field at the end of the quote
The console described here is Wheatstone item LX-24 2424
The models available for quotation are
Wheatstone LX-24-2424
Wheatstone LX-24-1616
Wheatstone LX-24-1612
Wheatstone LX-24-1208
Main features:
– Four high-resolution LED arrays (one switched)
– Four stereo buses
– Four aux pre-fader sends with master level controls
– LED talkbacks for Aux Send levels and PAN adjustment
– CUE stereo bus with stereo speakers and CUE class D amplifier
– Native class D headphone amplifier and level control
– Four mix-minuses
– Two independent studio monitor outputs
– Digital clock / timer
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]– VGA and USB connectors for configuration and installation
– Two programmable buttons per fader
– 12 programmable buttons in the master section
Console specifications:
– 24 Faders LX-24 with:
– 4 pairs of LED Program Meters, Aux with sending level
– Displays, stereo Cue speakers, headphone amplifier
– 24X-IN input modules
– 1 LX-CR Control Room Monitoring Module
– 1 LX-HP Headphone Monitoring Module
– 1 LX-S1 Studio 1 Monitoring Module
– 1 LX-S2 Studio 2 Monitoring Module
– 5 LX-BK Filling modules
– 1 LX-HPJA External Headphone Jack
– 1 PSE-2 Power Supply
– 1 Power cable
– 1 LX-24 with user manual
– 1 blade Mix Motor
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]WheatNet-IP extends the power of the LX-24
With WheatNet-IP BLADE-3s, you get a virtual rack room in a 1-rack space box. They handle all I/O (AES/EBU, SPDIF, AOIP, MADI, SDI and AES 67) and provide full routing capabilities. Each BLADE-3 offers two 8×2 utility mixers, 12 universal GPI/O ports, 128 software logic ports, silence detection, integrated audio player, stereo multiband audio processing and much more, available anywhere on the network. With it, you can create workflows that would require a ton of third-party equipment.
[/vc_column_text][vc_column_text]
Blade WheatNet-IP BLADE 3s features
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_column_text]- Low-profile table design
- Meterbridge with up to four sets of high-resolution LED meters
- Each input channel features:
– Four stereo bus assignments
– Four aux pre/post fader sends
– Four mix-minuses - Bus-Minus
- Display of font name
- A / B source selector
- 2 programmable buttons
- EQ and Dynamics including
– 4-band parametric EQ,
– High and low pass filters,
– Compressor and Expander / Noise gate - Control room and headphone outputs with level control and source selection
- Two independent studio outputs
- Stereo signal speakers and amplifier, built-in meterbridge
- Integrated VGA and USB-Mouse connectors
- Event storage (snapshots) and recall
- BLADE mixing motor included
[/vc_column_text][/vc_column][/vc_row]
